Tel: +86 18820135908
Stainless steel belt
Characteristic of stainless steel belt AS1200
·High strength and hardness
·Easy to clean,no bacterial residue
·High temperature resistance and corrosion resistance
·Flat and straight, stably running
·Perfect welding technology with long service life
·Any size can be customized
·We guarantee every belt we sold.
The strength of stainless steel belt AS1200 is traditionally understood as its ability to resist flow/deformation and breakage (brittle fracture or ductile rupture) under applied load. The breakage, though looking like an abrupt occurrence, actually results from a strain-rate/time dependent process of damage evolution, 60% of the test material can bear the load cycle of 2,000,000 times. At the normal temperature environment, the fatigue limit of basic metal is + 470 N/mm squared.
The stainless steel belt AS1200 is capable of operating normally at temperatures from -50° to 300° and exhibits a very stable operating condition.Whether it is food industry or chemical industry, stainless steel belt can adapt to the corrosive environment.Advanced welding technology enables the weld zone with up to 90% property compare with parent material.
For stainless steel belt, TIG/L/M-P is the first choise. This welding technology can control the thickness tolerance within 0.02mm. According to different welding factor of different material, welding strength can up to 80%-97% after treatment(Compare with raw material).
Scope of supply
Thickness：0.4/0.5/0.8 / 1.0 / 1.2 mm
Austenitic stainless steel AS1200 steel belt can be used in almost all industry, such as food industry, chemical industry,rubber industry,film industry, electron industry, phaemaceutical industry and so on. Surface finish is one of the reference for different industries, mirror polished surface is also available.
Austenitic stainless steel belt AS1200 for chemical industry.
Steel belt granulator: Petroleum resin, phenolic resin, rosin resin, polyamide resin, epoxy resin, sulfur, paraffin, special wax, asphalt, stearic acid, fatty acid, chloroacetic acid, antiaging agent, hot melt adhesive, maleic anhydride, carved white block, p-nitrochlorobenzene, maleic anhydride, aluminum sulfate, calcium chloride, sodium thiocyanate, phloro-diamine, catechol.
Steel belt flaker: For Epoxy, Polyster resin, Phenolic resin, Acrylic resin, Hydrocarbon resin,and other all kinds of resin.
Powder coating, film casting, rubber vulcanization.
The application of austenitic stainless steel belt AS1200 infood industry
Up to 300°C：Steamer for cakes,sandwiches,dumplings and other food steaming; drying system for Vegetables and fruits.
Low to -50°C：Candy&chocolate granulation, seafood&fished IQF processing.