Copyright © 2018 Guangzhou Consol Machinery Equipment Co., Ltd. | All Rights Reserved. 粤ICP备18032917号
Tel: +86 18820135908
Email:paul@consolbelts.com
Martensitic Steelbelt MS-1650
The CONSOL MS1650 belt grade is made of low carbon,martensitic, precipitation hardened, stainless steel of type 15-7 PH and is characterised by:
• Excellent static strength
• Excellent fatigue strength
• Good corrosion resistance
• Very good wear resistance
• Very good repairability
CONSOL MS1650 is a high strength steel with excellent mechanical properties.This, in combination with good corrosion resistance, makes it the ideal choice for applications in very harsh conditions. Widely used in industries of artificial board, artificial marble,composite materials and so on.
Corrosion resistance
MS1650 shows good corrosion resistance under normal air conditions. However, the steel belt should not be applied to the environment with hydrochloric acid.
Chemical component |
|||||||||
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Cu |
Ti |
Mo |
0.073 |
1.53 |
0.69 |
0.0062 |
0.002 |
13.56 |
7.09 |
0.71 |
0.48 |
0.88 |
Weldability
MS1650 steel belt has good welding performance, and the weld has good strength and toughness. The welding wire is the best for ER632 and ER630, and the ideal welding method is TIG welding. Even if there is no weld heat treatment, there is good strength. Guangzhou kenshao has the ability to heat heat treatment on site, and the welding coefficient is close to 0.9 by welding heat treatment.
Scope of supply
Length: customizable
Width: 1000/1200/1500/2000.
Thickness: 1.0/1.2/1.5/2.0
The maximum width of the single steel band is 1500mm.Special specifications can be customized.