50m extra-long steel belt cooler for resin flakes.

2020-04-09

Steel belt flaker working principle

The melting material go through the overflow gate distributor or rolling distributor and spread on the steel belt which is moving at a constant speed, there are continuous spraying and cooling units set under the steel belt, to ensure the material in the steel belt can be solidified quickly, and get the final flake production. After the cooling system,the flakes will be broken into small pieces by breaker and go to the next packing processing.

Application

the steel belt flaker is suitable for all kinds of materials with melting point (softening point) at 250℃ to condense for flaking, typical application materials are resin, asphalt, stearic acid products, hot sol, m-phenylene diamine, urea, rubber and plastic additives.

Main advantages

·Reduce dust and improve operating environment;

·Continuous operation to improve production efficiency.

·Thin steel strip heat transfer and forced spray cooling, so that hot melt materials can be quickly solidified.

·The steel belt and the distributor adopt frequency conversion to adjust the speed, which can be adjusted and controlled conveniently according to the production capacity and physical property.

·The system operation is stable and reliable.

NEWS&EVENT

Steel belt pastillator granulation production line for jewelry wax middle temperature wax

Rotary belt condensation pastillator granulator&pelletizer is using low melting point characteristic of the material (50 ℃ to 300 ℃), through the feeding head, the liquid material will drop into the upstream moving steel belt,with the continuous spray cooling device set at the bottom of the steel belt (spray type water cooling), materials will be cooled quickly and become solidification in the process of conveying